One familiar with the product performance
Get IR Dome IP Camera products, engineering and users should be familiar with the technical parameters of the product, such as input voltage is how much power, what functions, as far as possible the idea in mind.
Pre-installation deal with the dome camera to detect and adjust so that the IP Camera is in proper working order.
Pre-construction, according to the environment and safety, aesthetics, such as starting, installed wall or lifting.
4, the installation angle
Dome Camera installation angle is a direct impact on the scope of the monitoring image, the installation according to the needs on the ground to operate. Less than 6 meters installed in the cell door, the camera angles suggest the best is 30 ° -60 °; if installed at the checkout, the WiFi IP Camera angle should be considered in the ± 15 ° -20 °. In short, the camera as much as possible to avoid backlit camera situation, so in order to meet customer requirements as much as possible.
5, do the processing of the video interface
Hemisphere camera video signal output port, power input port control signal port of the more important, the installation should try to do waterproof, as well as the oxidation treatment. In order to avoid instability, uncontrolled, not even display the image of the phenomenon.
The cameras are generally 24 hours a day, so do the maintenance of the Network Camera, you can extend the life of the camera and safeguard the stability of the camera image effects, specifically note the following.
Should be noted that the voltage stability of the camera, otherwise the effect will affect the image, and even the camera was damaged;
Often check whether the wires are damaged, aging, to avoid the occurrence of unusual circumstances;
Should try to avoid sunlight or bright light for a long time direct in order to avoid damage to the CCD camera;
Need for frequent cleaning Dome Camera, such as frequent cleaning of the Security IP Camera casing surface dust, and try not to open the shell, such as the need to open, the first power outage;
Establish camera file in order to facilitate inspection, testing future.