Report this Article

Something About Of The Suzuki GSV-R Motorcycle


  • Comments 0
  • Views 0

Suzuki GSV-R is the name of the series of 4-Stroke V4 prototype motorcycles developed by Suzuki to compete in the MotoGP World Championship. GSV-R replaced Suzuki’s 500 cc 2-Stroke V4 RGV500 which was ridden by Kenny Roberts, Jr. to win the GP500 Championship in 2000. The GSV-R was introduced on 2002, one year earlier than the original plan, with codename XRE0. New regulations were promoting the growth of four-stroke engines, and the performance of the new engine during testing was strong according to Suzuki. Despite the use of a new engine, XRE0 was using the old RGV500 Gamma Chassis, which was later criticized as a big mistake by many MotoGP analysts. Using the chassis and fairings that were previously made for the 2-Stroke RGV500 engine, XRE0 was hampered by many stability issues. The use of RGV500 Tyre spec was another mistake. Despite all of that, XRE0 was able to taste its first podium on the opening round at Suzuka and sacked 3rd place at Rio in the same year. XRE0 achievements however were inconsistent, as the riders often fell down, crashed, or were forced to retire by technical failures. The top XRE0 rider by the end of The 2002 MotoGP Championship was Kenny Roberts, Jr. in 9th place overall.

For 2007, MotoGP rules were changed to allow a maximum displacement of 800 cc. Suzuki introduced an 800 cc version of the GSV-R also known as GSV-R800. The GSV-R800 was codenamed XRG0 because of its newly redesigned engine based on displacement limitations. The new XRG0 engine was based from the layout of the 2006 990 cc GSV-R however, the XRG0 engines bore, stroke, and cylinder pitch had been redesigned to better suit the 800 cc engine displacement. The Factory Rizla Suzuki MotoGP team stated the new engines aim was to ‘achieve the best possible horsepower and reliable high rpm operation, and to provide the riders with user friendly power delivery and predictable engine character.’ The XRG0 was also equipped with a redesigned Engine control unit supplied by Mitsubishi, capable of producing 220 horsepower at 17,500 rpm. The Chassis layout and wheelbase length from the 2006 GSV-R XRE4 used in the 2006 MotoGP season remained on the new model, however the fairing design had been updated to better accommodate high speed stability.

The 2008 MotoGP season brought another redesigned GSV-R800 that Suzuki codenamed XRG1 as the successor to the XRG0 of the previous year. This second generation 800 cc four-stroke prototype was the most complex and technically advanced racing motorcycle Suzuki had ever produced at its time. The XRG1 had been developed closely with team riders Chris Vermeulen and Loris Capirossi and the feedback from the MotoGP team and Suzuki test engineers. A key focus area in refining the XRG1 was improving acceleration. This was accomplished by refining every detail of the 2007 XRG0 engine and an updated Mitsubishi ECU. The resulted engine redesigning provided lower fuel consumption and increased usability. Further refinements of the XRG0 chassis for the 2008 XRG1 allowed for better cornering performance and change of direction. Along with the chassis refinements, a newly designed fairing was developed to reduce wind resistance to enhance handling characteristics.For more info about Suzuki Motorcycle Fairings, Motorrad Verkleidungen and Suzuki Fairings, please visit our website!

Share

admin1019 Article's Source: http://articles.org/something-about-of-the-suzuki-gsv-r-motorcycle/
Author:
Bio: Our business was start from Ebay.we sells Motorrad Verkleidungen and Motorrad Teile on Ebay since 2008,we have served thousands of motorcycle rider worldwide and get thousands of good review.During these years we have acquired a lot of motorcycle parts selling experience and cooperate with many parts factory to ensure our service and products can outstanding.


  • Posted On April 17, 2012
  • Published articles 10

Post Comment