Every pool owner will encounter a green or black pool at some time. It is advisable to avoid this situation by maintaining and servicing your above ground swimming pool correctly. Reviving your swimming pool to its former clarity will require time, effort, money and will certainly test your patience. The fantastic news is that there is a tried and tested technique for clearing up a dirty, green pool.
The guidelines outlined below ought to be followed in sequence to ensure the best results for your above ground swimming pool.
1. Clear away the leaves and debris that is laying at the bottom of the swimming pool. This can stir up the water and worsen the appearance of the pool, but do not fret as it will settle within a couple of hours. Do not vacuum the swimming pool whilst there is still debris in the bottom as this can surely result in blockage within the skimmer or filter.
2. Modify the water pH and alkalinity levels with Ph Plus, Ph Minus and Alkalinity Plus. The water will not clear unless these levels are within normal range.
3. Shock the swimming pool with a high concentration of chlorine. This will eliminate all the algae and bacteria inside the swimming pool. For speedier results, use liquid shock. Very dirty swimming pools might need repeated dosages of liquid shock over a time period of a few days is doses of 3 or 4 gallons. If the needed outcome is not achieved overnight, add another 3 or 4 gallons in the morning. Continue this approach till the water color changes to either a cloudy white or clear. As soon as this outcome is reached, add a top quality algaecide to the water.
4. Backwash 3 or 4 times and operate your filter for Twenty four hours. If the swimming pool stays cloudy and the water does not clear, use a clarifier. Please note that this is exclusively for sand filters. You will need 1 ounce of super concentrated clarifier per 5000 gallons of water. If you are unsure of the concentration, simply adhere to the directions on the label. Operate the filter for an additional 12 hours and let it sit overnight. If carried out properly, the dead algae will sink to the bottom. Vacuum it up first thing in the morning before the rays from the sun reach the swimming pool. Continue operating the swimming pool filter and backwashing it. The more you do this, the quicker it is going to clear up. You cannot over backwash the filter so do not be concerned. Remember that D.E. filters need to be topped up through the skimmer after every single backwash.
5. Once clean water has been restored to your swimming pool, vacuum up the leftover debris and enjoy.
If following these directions does not clean up your above ground swimming pool with 5 or 6 days, check your filter as it may not be working properly. For more data on maintaining and servicing your above ground swimming pool, visit http://www.aboveground-swimming-pools.com.